수직구간의 지지 간격은 다음과 같다가. floor level 위

수직구간의 지지 간격은 다음과 같다
가. floor level 위 : 최대 1.2m
(가) Floor 구조체에 지지용 "ㄷ" 형강(100×50x6t)을 tray side rail 양측에 설치 후 양 측 각 2개소M12 Shank bolt nut로 지지한다

Kết quả (Anh) 1:

Vertical sector support intervals are as followsUp to 1.2 m above floor level.(A) Floor support structure "shall be" beam (100 × 50x6t) tray side rail on both sides after the installation, Ms. bolt M12 nut on each side of the 2 supports to the Shank

Kết quả (Anh) 2:

The vertical support spacing intervals are as follows
a. above floor level: up to 1.2m
(that) Floor supporting structure for the "c" shaped steel (100 × 50x6t) installed on both sides of the tray side rail after each of two locations on both sides M12 Shank bolt nut as a support and

Kết quả (Anh) 3:

the vertical section of the support interval is as follows.. in the 1.2m floor level:(i) Floor support structure in the "stem to stem the" steel (100 x 50x6t) installed on both side rail tray angle measurement, the two M12 in Shank nut as support.